ON-SITE SPRAYING SPECIALISTS

ON-SITE SPRAYING SPECIALISTS

Protective Coatings – Equipment Upgraded

July 31, 2018

Protective Coatings – Equipment Upgraded

July 31, 2018

Written by: Cladspray

GET IN TOUCH ABOUT YOUR OWN PROJECT

INDUSTRIAL AND PROTECTIVE COATINGS INSPECTION

The protective coatings process requires inspection at every stage to ensure compliance to the specification. From the preparation of the surface to be coated, through climatic condition monitoring to the dry film thickness evaluation, visual assessment and gauge-based testing will ensure adequate process control.

We are excited to have recently upgraded our specialist tools, to include the latest in paint inspection equipment for the industrial and protective coatings industry.

Elcometer 319 Dewpoint Meter

The Elcometer 319 Dewpoint Meter has a robust temperature sensor, and is designed to measure and record all relevant climatic parameters required to determine whether the conditions are suitable for painting.

Elcometer 456 Coating Thickness Gauge

A coating thickness gauge (also referred to as a paint meter) is used to measure dry film thickness. Dry film thickness is probably the most critical measurement in the coatings industry because of its impact on the coating process, quality and cost. Dry film thickness measurements can be used to evaluate a coating’s expected life, the product’s appearance and performance, and ensure compliance with a host of International Standards. The Elcometer 456 Coating Thickness Gauge sets new standards; providing reliable and accurate coating thickness measurements; helping us to become more efficient.

ABOUT ELCOMETER

Elcometer is a world leader in the design, manufacture and supply of inspection equipment to the coatings, concrete and metal detection industry. Their philosophy is to provide industry leading, innovative, high quality products and they have a range of products specifically developed to meet the needs of the coatings industry. 

Cladspray Solutions are an on-site spraying company based near Norwich (Norfolk) in the East of England; but our teams are available to work nationwide 24/7. We use the latest HVLP and airless spraying equipment to ensure a factory finish. We fully understand the importance of schedules and budgets, and aim to stay within both at all times. If you feel you could benefit from our services, please feel free to contact us and we will advise you of the best solution for you and your premises.

To find out more about the services we offer, including industrial roof coatings, cut edge corrosion repair and intumescent coatings, take a look here.