Facilities Management Journal

April 30, 2020

Facilities Management Journal

April 30, 2020


Our recent underground carpark project has been featured on the FMJ website. You can see the full case study on our website here.

A Norwich underground car park has been given a bright and colourful, hard-wearing character thanks to Bradite’s high performance CF22 Floor Finish.


Locally based Cladspray Solutions tackled the job at Trinity Street where a basement car park beneath a new build apartment block needed marking out.


The client required 13 individual spaces plus two specifically marked for electric charging points. But the first task was to prepare the rough concrete floor surface which had been used as a storage area for plant and materials during the construction of the block above.


“First we diamond grinded the floor to create an even, clean surface,” says Cladspray Solutions Business Development Manager Dan Ruegg.


There was no hesitation in using the CF22 for the new covering. “This will be the second time we’ve used the product and we knew it would be durable enough for the job even though it’s a single pack product,” he said.


First, the main floor was painted grey with one coat of the chlorinated rubber floor paint thinned to 20 percent. This was followed by two full coats.


The individual bays were to be delineated in a contrasting colour rather than the more traditional broken white lines. Bays 1 to 13 were to be painted blue and the two electric charging bays bright green. To achieve this the individual bays were masked with timber while the rest of the floor was painted and then treated in the appropriate colours with CF22, again thinned to 20 percent, followed by two full coats.


Thermoplastic bay numbers and car charging logos were then applied by blow torch.


“The product is easy to use being single pack which means no mixing,” says Mr Ruegg. “The drying time for the three coats was a total of three days for the 700 square metres.”


The floorcovering was applied by roller rather than spray. Mr Ruegg explains: “We find that using a roller we can work the paint in very well making for a really durable, long-lasting surface covering.”


Bradite CF22 is suited to both concrete and steel surfaces and is highly resistant to chemicals and oils. It can be used equally indoors or outside.

You can see the article in full here.


Give us a call on 01603 405318, or email us and we will be more than happy to assist you: enquiries@cladspraysolutions.co.uk

want to know more?

Cladspray Solutions are an on-site spraying company based in Norwich (Norfolk) in the East of England; but our teams are available to work nationwide 24/7. We use the latest HVLP and airless spraying equipment to ensure a factory finish. We fully understand the importance of schedules and budgets, and aim to stay within both at all times. If you feel you could benefit from our services, please feel free to contact us and we will advise you of the best solution for you and your premises.

To find out more about the services we offer, including industrial roof coatings, cut edge corrosion repair and intumescent coatings, take a look here.